Save hours checking fence lines for shorts. Volt meter, current meter and short finder in one. Tracks the source of erratic or poor electric fence performance in minutes and fits in your pocket!
Large easy to read LCD display shows voltage and current at the same time
Arrow shows direction of fault
Extendable contact probe for reading voltage on energizers and other hard to reach places
Can measure pulse intervals of up to 10 seconds i.e. suitable for B11/S10 energizers in slow pulse mode
Earth probe connector for more accurate reading
Auto On/Off when fence pulse detected
Pocket sized tough, water and impact resistant case
Long, 3-4 year life on replaceable battery (CR2032 battery included)
Maximum voltage rating 16kV.
| Warranty | 1 year |
|---|---|
| Height | 130mm |
| Width or Length | 70mm |
| Depth | 25mm |
| Product Weight | 0.10kg |
The i Series System separates the fence information from the Energizer. This means the Energizer can still be hidden away where you’ve always kept it, at the back of the shed, but you can position the Energizer Controller where it is more accessible (up to 50m) away from the Energizer. The Controller shows all of your fence performance information (e.g. voltage, faults and location) in one convenient separate display box – providing greater visibility and control.
The M10,000i system is modular and comes with other products that enhance its capability.
- Features
-
Large easy to read LCD display shows voltage and current at the same time
Arrow shows direction of fault
Extendable contact probe for reading voltage on energizers and other hard to reach places
Can measure pulse intervals of up to 10 seconds i.e. suitable for B11/S10 energizers in slow pulse mode
Earth probe connector for more accurate reading
Auto On/Off when fence pulse detected
Pocket sized tough, water and impact resistant case
Long, 3-4 year life on replaceable battery (CR2032 battery included)
Maximum voltage rating 16kV.
- Technical Specifications
-
Warranty 1 year Height 130mm Width or Length 70mm Depth 25mm Product Weight 0.10kg - How It Works
-
The i Series System separates the fence information from the Energizer. This means the Energizer can still be hidden away where you’ve always kept it, at the back of the shed, but you can position the Energizer Controller where it is more accessible (up to 50m) away from the Energizer. The Controller shows all of your fence performance information (e.g. voltage, faults and location) in one convenient separate display box – providing greater visibility and control.
The M10,000i system is modular and comes with other products that enhance its capability.